Gleason Works No. 102 Hypoid Generator

Description

You are purchasing a: Gleason Works No. 102 Hypoid Generator.
Hydraulic Double Acting Chucking Mechanism
Standard Feed Cam, For "Completing" Operations
Standard Generating Cam (As Last Used On The Machine)
Change Gears For One Operation As Last Set-Ip On
The Machine (Approximately 12 To 16 Gears Mounted)
Additional Change Gears (32 Spur Gears), (13 Helical
Gears)
Assorted Extra Generating & Feed Cams
Cutter Depth Gauge
Full Complement Of Electrics (Motors/Controls)
Self Contained Coolant System
Self Contained Hydraulic System
GLEASON Automatic Counter & Stop
Assorted Guards, Covers
Special info :
Max. Diametral Pitch (Module) 16 DP/(1.58-Module)
Cone Distance 0-2.13"/(0-59mm)
Work-Head Angle -12 To 90 DEGREES
Extreme Ratio ANY PRACTICAL RATIO
Min Ratio Non-Genrtd Spiral Bevel Gears 2.5 to 1
Min ratio Non-Gnertd Hypoid bevel Gears 3.5 to 1
Maximum Face Width .438"/(11.11mm)
Number Of Teeth 5-200 (Except Prime No.s Over 100)
Max Gear Pitch Diameter (Shafts At 90º)
Spiral Bevel Spiral Bevel Spiral Bevel Hypoid
Spiral Angle       0º    20º            35º 50º Pinion
10-1 Ratio 4-1/4" 108mm 4-5/8" 117mm 3-3/4" 95mm 3-3/4" 95mm
3-1/2 - 1 4"     102mm   4-1/2" 114mm 3-5/8" 92mm 3-3/4" 95mm
2-1/2 - 1 3-7/8"    98mm 4-1/4" 108mm 3-1/2" 89mm 3-3/4" 95mm
2 - 1 3-3/4" 95mm 4-1/8" 105mm 3-3/8" 79mm 3-3/4" 95mm
1-1/2 - 1 3-1/2" 89mm 3-7/8"   98mm 3-1/8" 79mm 3" 76mm
1 - 1 3" 76mm 3-1/4"   83mm 2-5/8"  67mm 2-1/4" 57mm
Work Spindle Bore Dia (large end) 1.53"/(38.89mm)
Work Spindle Bore Taper Per Ft. .5"/(12.7mm)
Depth Of Taper 3"/(76.2mm)
Diameter Of Spindle Thru-Hole .75"/(19.05mm)
Max Dist Spindle Nose To Machine Center 5"/(127mm)
Min Dist Spindle Nose To Machine Center 1.75"/(44.45mm)
Spindle Offset, Above & Below Center 1.13"/(28.57mm)
Cutter Speeds 72-400 Ft./Min./(22-122 M/Min.)
Feeds, Time Per Tooth 1.28-48 SECONDS
Cutter Diameters Utilized 1",1.5",2" & 3.5"
Cutter Radial Setting 0-2.25"/(0-57.2mm)
Main Drive Motor 3-HP/1800 RPM
Floor Space 26.5"x 39.5"
Machine Net Weight 3,425 Lbs.
NOTES:  Suitable For The Cutting Of Spiral Bevel,
Hypoid & Zerol Bevel Gears & Pinions, Of 16 DP
(Module-1.5) & Finer, Up To 4.25" (108mm) Dia.,
.437" (11.2mm) Face-Width
PRICE: was-,500.00  Now- ,500
0 shipping to the lower 48 States with a forklift or loading dock and address . Please contact us for shipping to  Hawaii, Puerto Rico and any other  Countries...
We reserve the right to remove equipment/machinery from eBay. Equipment is for sale Locally as well.